Campaign Best Practices
Recommended practices drawn from across the Campaign guides, covering how to plan, build, schedule, run, monitor and report on a campaign. Each section below matches its own detailed guide.
Overview
A campaign is easier to get right when its pieces are prepared before the wizard is opened. See Campaign Overview.
- Prepare the audience, the filter and the do not call entries first. The wizard asks for each of them in turn, so having them ready avoids stopping halfway to build one.
- Read the Lead Status Breakdown after saving. Newly imported contacts can take a short time to appear. Check that the lead count matches the audience you expected before starting.
- Treat Pending as a safe holding state. A Pending campaign dials nothing until it starts, which gives time to review it and to adjust it.
Getting Started
The seven step wizard is best followed in order. See Campaign Getting Started.
- Run a first campaign against a very small audience. A few internal contacts are enough to confirm the setup, the schedule and the dispositions before pointing the campaign at a full list.
- Decide the channel and the campaign type before saving. Both lock when the campaign is saved. A different channel or type means creating a new campaign.
- Check the Review step carefully. It shows every earlier choice on one screen. It is the last point at which a wrong setting is cheap to fix.
Campaign Channels
The channel decides which fields appear in every later step. See Campaign Channels.
- Choose the channel that matches how customers expect to be reached. Voice Call suits a conversation, Email suits a longer message, SMS suits a short notice, and WhatsApp suits customers who already use it.
- Give every campaign a distinct title. A title must be unique across every campaign, whatever its channel, and a clear one makes the Campaigns list easier to scan.
- Make sure an approved template exists before building a WhatsApp campaign. A WhatsApp campaign can only send an approved Template and cannot be configured past that step without one.
Campaign Builder
The Audience and Configuration steps hold most of the required settings. See Campaign Builder.
- Prefer Select from Module over Upload CSV for ongoing work. A module based audience stays tied to the CRM records and to a saved filter. A CSV upload is a one time snapshot.
- Choose the handling type before filling in the other fields. Agent, IVR and AI Agent each show a different set of fields, so switching halfway through means re entering values.
- Match the Dialing Mode to the call. Preview lets an agent read the customer's details before the call is placed. Power dials automatically and suits high volume, and needs Number of Concurrent Calls and Max Waiting Calls in Queue set sensibly.
- Set Dialing Fields, Agent Group and Caller ID on purpose. Dialing Fields and Agent Group are required for an agent campaign. Caller ID is optional, so set it whenever the organization needs calls to show a specific number.
Dispositions
Dispositions turn each call into a structured record. See Campaign Dispositions.
- Pick the Call Type that matches the conversation. The Call Type scopes the list of dispositions, so Campaign and Collections offer payment outcomes while Support and Sales offer their own.
- Leave Disposition empty when the outcome differs per call. Prefilling one value for every call would record the wrong outcome on most of them. Let the agent choose.
- Remember that every field in this step is optional. Leaving Enable Dispositions off does not stop an agent from recording a disposition after a call. It only stops the campaign from prefilling one.
Scheduling and Retries
Timing settings decide when contacts are tried and how often. See Scheduling and Retries.
- Always set the Schedule Start Time, and add an end time for a bounded campaign. The start time is required. An end time keeps a short promotion from running past its window.
- Use a recurring schedule with a time window for repeat work. Choose Daily, Weekly or Monthly, and set a From and To time so contacts are only reached at suitable hours.
- Turn on Update leads when resuming for recurring campaigns that depend on fresh data. It syncs the audience from the CRM each time the campaign resumes. It is off by default.
- Choose retry settings that respect the customer. Set a Retry Interval long enough to be reasonable and a Max Retry Attempts that does not pester. Retries apply to automatic attempts only.
Campaign Monitoring
Three screens show how a campaign is progressing. See Campaign Monitoring.
- Start with the Lead Status Breakdown for a quick read. It shows how many leads are Pending, Queued, Connected, Not Connected and so on, without opening anything else.
- Use Campaign Execution to see what the engine itself is doing. The expanded log shows each action, its status and its reason. A SYSTEM_RETRY with NO AGENTS AVAILABLE means the engine is waiting for a free agent, not failing.
- Open a single lead when one result needs explaining. Its detail page lists the calls made to it, its latest disposition and its History of status changes.
Managing Live Campaigns
The detail panel holds every action for a campaign. See Managing Live Campaigns.
- Pause a running campaign before adjusting it. Topup, Reschedule, Edit and Delete work only while a campaign is Pending or Paused. They are greyed out the moment it starts.
- Choose the Topup duplicate option deliberately. Ignore is the default and avoids duplicates. Overwrite options replace existing records, so use them only when that is the intent.
- Reschedule only the statuses that need another attempt. Reschedule moves leads back into the queue. It does not change the campaign's own start time.
Reports and Dashboards
Built in reports and one shared dashboard cover campaign results. See Campaign Reports and Dashboards.
- Filter a report to one campaign before generating it. The Lead Detail Report shows rows only once a Campaign is chosen under Filters and the report is generated.
- Expect empty rows until a campaign has placed calls. A Pending campaign has no calls and no lead outcomes yet, so its report rows stay empty.
- Check the Campaign Date filter on the dashboard. The Outbound Campaigns Monitor opens filtered to This Month, so older campaigns will not appear until the filter is changed.
DNC Management
The do not call list protects customers who opted out. See DNC Management.
- Add an opt out the same day it is requested. The earlier an entry exists, the fewer chances there are for the number to be dialed again.
- Match the Channel and the Type to the campaign. Each entry blocks one Channel and Type combination. A Voice, Transactional entry does not block a Promotional campaign.
- Use a bare domain to block a whole email domain.
An entry such as
@domain.comblocks every address at that domain in one record. - Add the entry before the audience is pulled. A new entry does not remove a number from an audience that was already imported. It only stops that number from being included or redialed afterward.
Campaign Filters
A saved filter keeps the audience current. See Campaign Filters.
- Build and save the filter on the module's own list first. The Audience step only lists filters that were saved against the chosen module.
- Give each filter a clear, specific name. A name such as Overdue Loan Customers is easy to recognize in the dropdown months later.
- Confirm the lead count after saving the campaign. A filter that matches nothing leaves the campaign with no leads to dial.
Permissions
Six permissions decide who can see, build and run campaigns. See Campaign Permissions.
- Give Execute Campaigns only to trusted roles. It lets a user start dialing, so it belongs with the people responsible for the campaign's results.
- Scope agents to Own. Own lets an agent work the calls assigned to them and see their own results, without reaching other people's campaigns.
- Treat Manage DNC List as a separate decision. It is a plain switch, not an access level, and it controls who can edit the do not call list.
Use Case
Reading a worked example makes the pieces above easier to connect.
- Read the scenario first, then follow the configuration steps. The Campaign Use Case Scenario explains the business need, and Configuring the Campaign Use Case builds it step by step.